Ribbon and rope precision winding and ribbon rolling machine BS1-PW
Fully automatic universal machine BS 1-PW for precision winding of rope and rolling of textile and plastic ribbon on cardboard or plastic cores with or without out side flanges.
Machine equipped with:
- Ribbon/rope traversing with modern servo motor driven device.
- electronic gear box between traversing and mandrel drive for
- easy and fast exchange of all traversing parameters on the operation panel. Traversing parameters from one cross per traverse up to parallel wind are possible
- clamping device for cores with and without side flanges
- cycle counter, running length counter with adjustable accuracy.
- material defect sensing device with machine stop or doffing of the spools in a separate box.
- adjustable traversing material guides for different ribbon and rope widths.
Semi automatic universal machine BSH-PW for spooling and rolling of textile and plastic ribbon and rope on cardboard or plastic cores with or without side flanges.
Additional equipment
BS 1-PW
automatic tube supply with vibration feeder. hot cutting device with adjustable temperature and cutting time. speed regulation of winding mandrel with increasing spool diameter for constant ribbon/rope speed and ribbon tension over the complete winding cycle. Ribbon end fixed optionally with label, stretch film or stapler. foil banding of the wound spools on the winding mandrel. Foil widths can optionally be wider, equal or narrower as the spool traversing width. Foil is laid under the ribbon and the adhesive label does not touch the ribbon/rope material any more Foil shrinking on the winding mandrel. Film overlapping on the side of the spool is shrunk. The finished spool is protected. Use of stretch film is possible without end label and without shrinkage. Only one label on the spool to fix the beginning material supply creel for a tensionless material supply optionally from a supply spool, a supply roll or out of boxes. Combinations are possible. Ribbon/rope end sensor with clamping of the material in the creel for easy connection of the new ribbon/rope supply spool. creel with supply device for narrow pancake wound ribbon rolls. |
BSH-PW
- speed regulation of winding mandrel with increasing spool diameter for a constant ribbon speed and ribbon tension over the complete winding cycle.
- up movement of the ribbon guide and optionally away from the centre of the spool with increasing spool diameter for perfect ribbon traversing over the complete spool diameter.
- machine with pneumatic operated counter mandrel to clamp spools with side flanges and as counter bearing for heavy spools.
- automatic spool doffing of wound spools with a higher spool weight from the mandrel with doffing into a finished spool magazine.
- Optional hot cutting device for rope or ribbon.
- Operation panel with keyboard with storage of 99 winding parameter set.
Technical data
BS 1-PW
Wickelstellen | 1 |
Bandbreiten | 3 – 120 mm |
Durchmesser des Fertigprodukts | max. 250 mm |
Verlegebreite | max. 220 mm |
Folienbreite | max. 200 mm |
Drehzahl Wickelkopf | max. ca. 2000 1/min |
Bandgeschwindigkeit | max. 400 m/min |
Wickellänge | stufenlos einstellbar |
Materialvorlage | zylindrische Spulen max. 500 mm, 500mm lang oder Abzug aus einer Tonne |
Anschlusswert | ca. 2 kW mit Spulengatter je nach Ausführung 230V, 1 Phase |
Luftverbrauch | max. 1,5 m3/h |
Luftdruck | 6,0 bar |
Maschinengewicht | ca. 800 kg |
Flächenbedarf | Maschine ca. 1300 x 1200 mm Spulengatter ca. 1500 x 1000 mm je nach Ausführung |
BSH-PW
Wickelstellen | 1 |
Bandbreiten | 3 – 120 mm |
Durchmesser des Fertigprodukts | 260mm, max. 400 mm |
Verlegebreite | 300 mm max. 400 mm Verlegung über Servomotor, elektronische Steuerung mit Bedientableau für die Einstellung der Lauflänge, Verlegebreite, Verlegegeschwindigkeit pro Umdrehung, etc. |
Drehzahl Wickelkopf | max. ca. 2000 1/min |
Bandgeschwindigkeit | max. 400 m/min |
Wickellänge | stufenlos einstellbar über Meterzähler |
Materialvorlage | zylindrische Spulen max. 500 mm, 500 mm lang oder Abzug aus einer Tonne |
Anschlusswert | ca. 3 kW mit Spulengatter je nach Ausführung 230V, 1 Phase |
Luftverbrauch | max. 0,5 m3/h |
Luftdruck | 6,0 bar |
Maschinengewicht | ca. 600 kg |
Flächenbedarf | Maschine: 1300 x 1200 – 1700 mm je nach Maschinenausführung Spulengatter: 1500 x 1000 mm abhängig von den Anforderungen |