Precision Filter Winder MHW-40

Precision Filter Winder with electronic traverse motion

  • electronic traverse motion with servo drive
  • crossing ratio infinitely adjustable, can be modified during winding process
  • 2 spooling heads
  • simultaneous winding possibilities: 2 x 40”, 2 x 30”, 4 x 20”, 8 x 10”
  • spooling diameter of the finished product max.150 mm
  • automatic winding stop when diameter is reached
  • length of the finished product max. 40” (1016 mm)
  • traverse width can be modified during winding cycle
  • core diameter min. approx. 27 mm
  • yarn thickness max. Ø 5 mm
  • pneumatically expanding mandrel for center clamping of tubes and counter bearing
  • clamping of tube with elastomer segments, which swell under pneumatic pressure admission
  • winding speed of mandrels max. 2000 rpm
  • 1 pressure roll per head, touching the filters over the complete winding process
  • running length counter with metering wheel
  • 8 yarn guides, which can be coupled onto the traverse drive belt
  • 8 yarn breakage sensors, touchless
  • 2 side creels for 2 x 4 positions with reserve connection for supply packages with overhead unwinding
  • 2 yarn tension equilibration shafts with each 4 positions, mounted above the winding heads, can be partly decoupled for the operation of only 1 or 2 winding positions
  • touch panel to set-up winding parameters and programme storage

Optional

  • safety device: lateral safety fences on the machine sides
  • safety light curtain approx. 600 mm high on the front of the machine